Working Pressure
- HMK
- Working Pressure
（MPa）
| Thread |  |  |  |  |  |  |
| Metric Male O-Ring S-Series | Metric Male O-Ring L-Series | Metric Male O-Ring Adjustable Stud End S-Series | Metric Male O-Ring Adjustable Stud End L-Series | Metric Male Captive Seal S-Series | Metric Male Captive Seal L-Series | |
| M8×1 | 63 | 40 | 40 | 31.5 | – | – |
| M10×1 | 63 | 40 | 40 | 31.5 | – | 25 |
| M12×1.5 | 63 | 40 | 40 | 31.5 | 63 | 25 |
| M14×1.5 | 63 | 40 | 40 | 31.5 | 63 | 25 |
| M16×1.5 | 63 | 31.5 | 40 | 25 | 63 | 25 |
| M18×1.5 | 63 | 31.5 | 40 | 25 | 63 | 25 |
| M20×1.5 | – | – | – | – | 63 | – |
| M22×1.5 | – | – | – | – | 40 | 16 |
| M22×1.5 | 63 | 31.5 | 40 | 25 | – | – |
| M26×1.5 | – | – | – | – | – | 16 |
| M27×2 | 40 | 20 | 40 | 16 | 40 | – |
| M30×2 | 40 | 20 | 40 | 16 | – | – |
| M33×2 | – | – | – | – | 40 | 10 |
| M33×2 | 40 | 20 | 31.5 | 16 | – | – |
| M42×2 | 25 | 20 | 25 | 16 | – | – |
| M42×2 | – | – | – | – | 25 | 10 |
| M48×2 | 25 | 20 | 20 | 16 | 25 | 10 |
| M60×2 | 25 | 16 | 16 | 10 | – | – |
| Thread |  |  |  |
| Metric Male 74°Cone | Metric Male O-Ring | Metric Male 60°Cone Seat | |
| M10×1 | 35 | – | – |
| M12×1.25 | – | 63 | – |
| M12×1.5 | 35 | – | – |
| M14×1.5 | 35 | 63 | 34.5 |
| M16×1.5 | 25 | 63 | – |
| M18×1.5 | 25 | 63 | 34.5 |
| M22×1.5 | 20 | 63 | 34.5 |
| M24×1.5 | 20 | – | – |
| M27×1.5 | 20 | 40 | – |
| M27×2 | – | – | 27.5 |
| M30×2 | 20 | – | – |
| M30×1.5 | – | 40 | – |
| M33×2 | 16 | – | 20.5 |
| M36×2 | 16 | – | – |
| M36×2 | – | 40 | – |
| M39×2 | 12.5 | 25 | – |
| M42×2 | 12.5 | – | 17 |
| M42×2 | – | 25 | – |
| M45×2 | 10 | – | – |
| M45×2 | – | 25 | – |
| M52×2 | – | 25 | – |
| M60×2 | – | 25 | – |
| M64×2 | – | 25 | – |
| ISO 6162 Flange Size |  | |||||||
| Mid-Strength Bolt L-Series | High-Strength Bolt L-Series | Mid-Strength Bolt S-Series | High-Strength Bolt S-Series | |||||
| 1/2” | 35 | 35 | 35 | 40 | ||||
| 3/4” | 35 | 35 | 35 | 40 | ||||
| 1” | 25 | 31.5 | 35 | 40 | ||||
| 1-1/4” | 20 | 25 | 35 | 40 | ||||
| 1-1/2” | 20 | 20 | 35 | 40 | ||||
| 2” | 16 | 16 | 35 | 40 | ||||
| Thread |  |
| JIS Metric Male 60°Cone | |
| M12×1.5 | 34.5 |
| M14×1.5 | 34.5 |
| M16×1.5 | 34.5 |
| M18×1.5 | 34.5 |
| M20×1.5 | 34.5 |
| M22×1.5 | 34.5 |
| M24×1.5 | 27.5 |
| M27×1.5 | 27.5 |
| M30×1.5 | 20.5 |
| M33×1.5 | 20.5 |
| M36×1.5 | 17 |
| M42×1.5 | 17 |
| Thread |  |
| BSPT Male | |
| R1/8”×28 | 34.5 |
| R1/4”×19 | 34.5 |
| R3/8”×19 | 34.5 |
| R1/2”×14 | 34.5 |
| R3/4”×14 | 27.5 |
| R1”×11 | 20.5 |
| R1-1/4”×11 | 17 |
| R1-1/2”×11 | 10.5 |
| R2”×11 | 10.5 |
| Thread |  |
 |
 |
 |
| BSP Male 60°Cone Seat | JIS GAS Male 60°Cone | BSP Male O-Ring | BSP Male O-Ring Adjustable Stud End | |
| G1/8”×28 | 34.5 | 34.5 | 40 | 31.5 |
| G1/4”×19 | 34.5 | 34.5 | 40 | 31.5 |
| G3/8”×19 | 34.5 | 34.5 | 31.5 | 25 |
| G1/2”×14 | 34.5 | 34.5 | 31.5 | 25 |
| G3/4”×14 | 27.5 | 27.5 | 20 | 16 |
| G1”×11 | 20.5 | 20.5 | 20 | 16 |
| G1-1/4”×11 | 17 | 17 | 20 | 16 |
| G1-1/2”×11 | 10.5 | 10.5 | 20 | 16 |
| G2”×11 | 10.5 | 10.5 | 16 | 10 |
| Thread |  |
 |
 |
 |
 |
| JIC 74°Cone | SAE Male O-Ring S-Series | SAE Male O-Ring Adjustable Stud End S-Series | SAE Male O-Ring L-Series | SAE Male O-Ring Adjustable Stud End L-Series | |
| 5/16”×24 | 34.5 | – | – | 31.5 | 31.5 |
| 3/8”×24 | 34.5 | 63 | 40 | 31.5 | 31.5 |
| 7/16”×20 | 34.5 | 63 | 40 | 31.5 | 31.5 |
| 1/2”×20 | 34.5 | 63 | 40 | 31.5 | 31.5 |
| 9/16”×18 | 34.5 | 63 | 40 | 31.5 | 25 |
| 3/4”×16 | 31 | 63 | 40 | 31.5 | 25 |
| 7/8”×14 | 24 | 63 | 40 | 25 | 20 |
| 1-1/16”×12 | 24 | 40 | 40 | 25 | 20 |
| 1-3/16”×12 | 2 | 40 | 40 | 20 | 16 |
| 1-5/16”×12 | 21 | 40 | 31.5 | 20 | 16 |
| 1-5/8”×12 | 17 | 25 | 25 | 16 | 12.5 |
| 1-7/8”×12 | 14 | 25 | 20 | 16 | 12.5 |
| 2-1/2”×12 | 10.5 | – | – | 12.5 | 10 |
| Thread |  |
| ORFS Male O-Ring | |
| 9/16”×18 | 63 |
| 11/16”×16 | 63 |
| 13/16”×16 | 63 |
| 1”×14 | 40 |
| 1-3/16”×12 | 40 |
| 1-7/16”×12 | 40 |
| 1-11/16”×12 | 25 |
| 2”×12 | 25 |
| Thread | |
| NPT Male | |
| Z1/8” ×27 | 34.5 |
| Z1/4” ×18 | 27.5 |
| Z3/8” ×18 | 21 |
| Z1/2” ×14 | 21 |
| Z3/4” ×14 | 17 |
| Z1” ×11.5 | 14 |
| Z1-1/4” ×11.5 | 8 |
| Z1-1/2” ×11.5 | 7 |
